We are offering wide range of Valve Manifolds which include 2 Valve Manifolds, 3 Valve Manifolds and 5 Valve Manifolds.
We are instrumental in delivering quality range of 5 Valve Manifolds which have two valve for isolation, two for vent and one for equalizing. These are designed for connecting system impulse lines & transmitters and available in pipe to pipe (R), pipe to flange (T) and flange to flange (H). Our range is best suited for remote and direct mounting on DPT.
The range encompasses following:
•1/2" NPT(F)
• Pipe to flange or flange to flange connections on 54mm (2 1/8") centers
• One equalizer valve, two block valves, one bleed valve and 2 nos 1/4" NPT(F) purge (VENT) connections
Specifications:
• Types : separately type, integral type
• MOC : SS 304, SS 316, Brass, Monel, Hast alloy, CS
• Rugged construction to resist high pressures and temperatures
• Suitable for high pressures as 6000 psi at 200 o F or 4000 psi at 500 o F
Our organization has gained expertise in offering 2 Valve Manifolds which are widely acknowledged for their sturdy construction. These valves are used for connecting it with pressure gauge, pressure switch and pressure transmitter. In addition, these are also used for setting up a connection with impulse line & transmitters. We offer this range with simple calibration and isolation, block and pressure switches bleed for gauges, and static pressure transmitting instruments.
The specifications of this range is as follows:
•Types : Block & Bled type, Angle type, Integral types
•MOC : SS 304, SS 316, Monel, Hastalloy, CS
•Rated for pressures as high as 6000 PSI at 200 o F or 4000 PSI at 500
o F
•Available with PTFE packing
Grafoil Packing is used for a high temperatures
These valves have the capability to bear high pressure and temperature due to their rugged construction. Our valves are used for tee, calibration valve, isolation valve and all tubing and fittings. All these are united into one which help in decreasing the numbers of fitting.
We offer an exhaustive range of 3 Valve Manifolds which is available in pipe to pipe (R), pipe to flange (T) and flange to flange (H). These have two valves for isolation and one for equalizing and are designed especially for connecting system impulse lines & transmitters. Our valve manifolds have rugged construction which ensure high pressures and temperatures. The range is available in following specifications:
•Consist of 1/2" NPT(F)
•Pipe to flange or flange to flange connections on 54mm (2 1/8") centers
• Types : Block & Bled type, Integral types
• MOC : SS 304, SS 316, Monel, Hast alloy, Teflon, CS
• Ideal for remote and direct mounting on DTP, DPG, DPS
• Comprises of one equalizer valve, two block valves and 2 nos 1/4" NPT(F) purge (VENT) connections
• Rated for pressures as high as 6000 PSI at 200 o F or 4000 PSI at 500 o F
• PTFE Packing for higher temperatures
©Rusa International. All Rights Reserved. (Terms of Use) Developed and Managed by SME Business Services Ltd.
